cubietruck无线网卡的问题
为什么我插了网线无线网卡就可以正常使用，拔了网线，无线网卡就不行了 CT里面已经集成无线网卡，可以直接上wifi。 就是用集成的啊，问题是我不插网线，无线网卡就不正常，插了网线就ok z954134 发表于 2014-1-4 20:38 static/image/common/back.gif就是用集成的啊，问题是我不插网线，无线网卡就不正常，插了网线就ok
你跟我一样呢 还是跟设置有关吧。我一直在用wifi都没有问题 能说下你是怎么设置的吗？谢谢了 lsmod一下，看看有没有 gpio_sunxi 和 bcmdhd，然后看看dmesg的返回信息，就应该知道问题处在那里了 我用lsmod查看，看到有这2个模块，用dmesg查看，是以下信息：
[ 13.942201] dhd_bus_devreset: == WLAN ON ==
[ 13.965201] dhd_bus_devreset called when dongle is not in reset
[ 13.976071] Will call dhd_bus_start instead
[ 13.985186] bcmsdh_config_hw_oob_intr: Enter
[ 13.994521] dhd_bus_select_firmware_name_by_chip: firmware_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[ 14.014236] Final fw_path=/lib/firmware/ap6210/fw_bcm40181a2.bin
[ 14.025328] Final nv_path=/lib/firmware/ap6210/nvram_ap6210.txt
[ 14.081379] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 14.326946] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 14.338571] bcmsdh_set_drvdata Enter
[ 14.347865] bcmsdh_register_oob_intr Enter
[ 14.357588] bcmsdh_register_oob_intr IRQ=170 Type=414
[ 14.369994] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79
[ 14.386913] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=98:3b:16:1e:5f:c6
[ 14.412846] Firmware version = wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
[ 14.427508] Driver: 1.28.23.3 (r)
[ 14.427518] Firmware: wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
[ 14.451480] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79
[ 14.464311] wl_android_wifi_on: Success
[ 14.475662] CFG80211-ERROR) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=9a:3b:16:1e:5f:c6
[ 18.136205] PHY: sunxi_gmac-0:00 - Link is Up - 100/Full
PHY: sunxi_gmac-0:00 - Link is Down
PHY: sunxi_gmac-0:00 - Link is Up - 100/Full
PHY: sunxi_gmac-0:00 - Link is Down
PHY: sunxi_gmac-0:00 - Link is Up - 100/Full
能帮忙解决下吗？ 关注，最近正准备采购一个CT玩玩！了解一下这个版本有没有什么硬伤！！:D:D
页:
[1]
2