ubuntu烧到TF卡上，cubieboard2不能启动
我从http://www.gplsquared.com/eoma_boot/eoma_boot.html#Ubunt_13_04_3D 下载的cubieboard2的ubuntu固件通过Win32DiskImager写到tf卡上，可是每次都不能从tf卡启动，而是直接从nand启动。我只烧录了“cubie_eoma_ubuntu_13_04_3d.bin”， 没有烧录 “uSD_stage_sda1_cubie2.bin”， 请问后面的bin文件需要烧录吗，怎么烧录，有没有指导文件，我是新手，对这些不太懂。麻烦各位高手指导下，谢谢！！
启动时的打印如下：HELLO! BOOT0 is starting!
boot0 version : 3.0.0
dram size =1024
sum=0x37180653
src_sum=0x37180653
Ready to disable icache.
Jump to secend Boot.
[ 0.128]
U-Boot 2011.09-rc1-dirty (Nov 08 2013 - 11:06:32) Allwinner Technology
[ 0.136]version: 1.1.0
[ 0.139]pmbus: ready
[ 0.243]PMU: AXP209
[ 0.246]PMU: AXP20x found
[ 0.249]PMU: bat ratio = 100
[ 0.252]after set, dcdc2 =1400mv
[ 0.256]PMU: dcdc2 1400
[ 0.258]PMU: pll1 912 Mhz
boot_clock = 912
dcdc2_vol = 1400
[ 0.266]after set, dcdc2 =1400mv
dcdc3_vol = 1250
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 0
storage_type = -1
usb_recovery = 1
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.302]DRAM:1 GiB
relocation Offset is: 35b27000
donn't initialize ther user_gpio (main_key:boot_init_gpio)
DRV_DISP_Init: opened
[ 0.516]boot_disp.output_type=2
[ 0.519]boot_disp.output_mode=5
[ 0.523]boot_disp.auto_hpd=1
Hdmi_dvi_enable is NULL
Hdmi_get_input_csc is NULL
workmode = 0
[ 0.564]NAND: NAND_UbootInit
NB1 : enter NAND_LogicInit
nand : get id_number_ctl from script, 3
not burn nand partition table!
NB1 : nftl num: 3
init nftl: 0
NB1 : NAND_LogicInit ok, result = 0x0
[ 0.801]sunxi flash init ok
set to recovery
try sprite_led_gpio config
sprite_led_gpio start
sunxi sprite begin
screen_width = 1280
screen_height = 720
bar x1: 320 y1: 320
bar x2: 960 y2: 400
part name= bootloader
part start = 32768
part size= 65536
part name= env
part start = 98304
part size= 32768
part name= boot
part start = 131072
part size= 32768
part name= system
part start = 163840
part size= 1048576
part name= recovery
part start = 1212416
part size= 65536
part name= databk
part start = 1277952
part size= 524288
part name= misc
part start = 1802240
part size= 32768
part name= private
part start = 1835008
part size= 32768
part name= data
part start = 1867776
part size= 2097152
part name= cache
part start = 3964928
part size= 655360
part name= UDISK
part start = 4620288
part size= 0
data part size=2097152
begin erase part data
finish erase part data
part name= bootloader
part start = 32768
part size= 65536
part name= env
part start = 98304
part size= 32768
part name= boot
part start = 131072
part size= 32768
part name= system
part start = 163840
part size= 1048576
part name= recovery
part start = 1212416
part size= 65536
part name= databk
part start = 1277952
part size= 524288
part name= misc
part start = 1802240
part size= 32768
part name= private
part start = 1835008
part size= 32768
part name= data
part start = 1867776
part size= 2097152
part name= cache
part start = 3964928
part size= 655360
part name= UDISK
part start = 4620288
part size= 0
sprite update error: read image start error
sprite update error: current card sprite failed
now hold the machine
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:11-
-name- -start- -size-
bootloader: 1000000 2000000
env : 3000000 1000000
boot : 4000000 1000000
system : 5000000 20000000
recovery : 25000000 2000000
databk : 27000000 10000000
misc : 37000000 1000000
private : 38000000 1000000
data : 39000000 40000000
cache : 79000000 14000000
UDISK : 8d000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 6, low 4
cant find fstbt value
to be run cmd=run setargs_nand boot_normal
the user data'magic is bad
WORK_MODE_BOOT
WORK_MODE_BOOT
[ 1.066]Hit any key to stop autoboot:0
read boot or recovery all
[ 1.658]sunxi flash read :offset 4000000, 11645855 bytes OK
[ 1.667]ready to boot
NAND_UbootExit
NB1 : NAND_LogicExit
[ 1.670]
Starting kernel ...
[ 0.653965] aw_pm_init: not support super standby.
[ 0.696458] can't get item for emac_power gpio !
[ 0.956158] rtc_hw_init(416) err: set clksrc to external losc failed! rtc time will be wrong
[ 0.965719] sunxi_rtc_gettime(34): err, losc_err_flag is 1
[ 1.040845] hdmi module init
[ 1.045951] ##fb init:w=1280,h=720,fbmode=3
[ 1.071327] sunxi_rtc_gettime(34): err, losc_err_flag is 1
[ 1.077436] sunxi-rtc sunxi-rtc: hctosys: unable to read the hardware clock
[ 1.088944] init: reading config file
[ 1.095370] init: -----------娌℃壘鍒皊ata鑺傜偣锛宯and鍚姩--------------
[ 1.798401] init: HDMI status = 1, try 11 times!TV status = 0
[ 3.461940] init: start e2fsck listening...
[ 3.582749] init: do_umount: /data
[ 3.859399] init: do_umount: /cache
[ 3.951912] init: dont need format /dev/block/UDISK
[ 3.959580] init: dont need format /dev/block/private
[ 3.980774] init: do_umount: /databk
[ 4.120538] failed to get gpio_para used information
[ 4.132477] request gpio188 failed
[ 4.414709] init: untracked pid 1104 exited
[ 4.430680] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[ 4.446873] android_usb: already disabled
[ 4.452304] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 4.465008] init: using deprecated syntax for specifying property 'sys.usb.config', use ${name} instead
[ 4.475660] init: C_IN_START
[ 4.478700] init: path = /dev/block/data
[ 4.484189] init: C_IN_START
[ 4.488762] init: path = /dev/block/cache
[ 11.345102] sunxi_rtc_gettime(34): err, losc_err_flag is 1
页:
[1]