uart0作为一般串口
一般串口调试使用的是uart0,如果不使用它的话可以按照下面更改:--- a/tools/pack/chips/sun7i/configs/linux/default/env.cfg
+++ b/tools/pack/chips/sun7i/configs/linux/default/env.cfg
@@ -2,7 +2,7 @@ bootdelay=3
#default bootcmd, will change at runtime according to key press
bootcmd=run setargs_nand boot_normal#default nand boot
#kernel command arguments
-console=ttyS0,115200
+#console=ttyS0,115200
nand_root=/dev/nandd
我可以告诉你这样不稳定么? ttyS0 是特殊的端口 不建议当做一般端口 全志有专门说明
yuxue 发表于 2016-6-7 09:06 static/image/common/back.gif
我可以告诉你这样不稳定么? ttyS0 是特殊的端口 不建议当做一般端口 全志有专门说明
...
嗯,没测试过稳定性,但最好不要去改就对了
页:
[1]